KAD/SWI/107 Ethernet Tap Module 4-port
- Downloads
- SPECIFICATIONS
- SUPPORT
- REQUEST A QUOTE
Product Downloads
Featured Downloads
Features
- Four Ethernet ports configured as two tap ports (ingress) and two aggregator/monitor ports (egress)
- The tap port pair can be configured as either 10BASE-T or 100BASE-TX; the aggregator/monitor ports can only be configured as 100BASE-TX
- Ethernet traffic is forwarded between the ports of the tap port pair using a straight-through connection and a copy is forwarded to both of the aggregator/monitor ports
- No traffic from either of the aggregator/monitor ports is forwarded to the tap ports
- Store-and-forward operation for aggregation of tap traffic to monitor ports
- Industrial temperature operation (-40 to +85°C)
- Live at power-up (static internal routing; no MAC address learning time delays)
Applications
- Airborne network tap to aggregate data from an external aircraft 10/100BASE-TX Ethernet network
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
KAM/CHS/13U Acra KAM-500 chassis - 13 Slots
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
NET/SWI/101 Gigabit Ethernet Switch
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
KAD/DSI/102 24 channel Digital Module
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
KAD/VID/106 H.264 Video Encoder
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
KAD/MAT/101 Microcontroller-based module
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
KAD/ADC/136 8 channel Flexible ADC
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
KAD/ADC/135 12 channel Full/½-bridge ADC
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
KAM/CHS/04L Acra KAM-500 chassis, narrow form - 4 user-slots
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
KAM/CHS/03F Acra KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
NET/REC/001 Ethernet Network Recorder (CompactFlash)
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
4 Input, Ethernet Tap
The KAD/SWI/107 is an Ethernet tap module designed for operating in harsh environments. All connections use copper cabling, minimum specification CAT5.
Two individual ports of the KAD/SWI/107, which together implement a tap on the Ethernet link, are referred to as a tap port pair. One of these ports is referred to as the tap port; the other port is referred to as the paired tap port. The tap port pair may be configured as 10BASE-T or 100BASE-TX and connect to the external Ethernet network. The pair of aggregator/monitor ports can only be 100BASE-TX and connect directly to an Ethernet sink device such as a NET/REC/001 or a KAD/EBM/101.
The KAD/SWI/107 provides an active non-intrusive mechanism to monitor the traffic on an external network. Traffic received on each of the tap ports is forwarded to both of the aggregator/monitor ports and the paired tap port. The traffic forwarded to both the aggregator/monitor ports is identical, which allows for the data to be simultaneously recorded, analyzed, displayed, and parsed. Traffic received on the aggregator/monitor ports is not forwarded to the tap port pair.
There is a network activity register for each tap port that counts the number of packets received through each port and the packets forwarded through the other three ports during a one-second interval. Both registers can be read over the backplane.
Download Product Sheet register now
Product Finder
CONTACT SALES
Contact our sales team today to learn more about our products and services.
GET SUPPORT
Our support team can help answer your questions - contact us today.