KAD/CDC/002 24 channels Current-to-Digital Converter
- Downloads
- SPECIFICATIONS
- SUPPORT
- REQUEST A QUOTE
Product Downloads
Featured Downloads
Features
- 24 current input channels
- Simultaneous 14-bit sampling for each channel
- Input range ±20 mA
- Accuracy: ±0.5% FSR for input range ±20 mA
- Programmable range and filter cutoff for each channel
- For use with 4-20 mA transmitters
- Short to ground on any channel does not affect others
- Up to 17,500 samples per second per channel
- Up to 1.1 kHz bandwidth
Applications
- Current measurements
KAM/CHS/13U Acra KAM-500 chassis - 13 Slots
The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...
NET/REC/001 Ethernet Network Recorder (CompactFlash)
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
NET/SWI/101 Gigabit Ethernet Switch
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
KAD/DSI/102 24 channel Digital Module
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
KAD/VID/106 H.264 Video Encoder
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
KAD/MAT/101 Microcontroller-based module
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
KAD/ADC/135 12 channel Full/½-bridge ADC
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
Differential-ended current-to-digital converter (1.1 kHz b/w) - 24 channels at 17.5 ksps
The KAD/CDC/002 is used to condition and digitize up to 24 differential-ended current channels. At the heart of the KAD/CDC/002 is a hard-wired state-machine that over-samples all channels and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by 2, 15-tap, Finite-Impulse-Response (FIR) filters with 32-bit coefficients. All signals are sampled simultaneously. Secondary gain and offset are achieved digitally according to specified range.
Download Product Sheet register now
Product Finder
CONTACT SALES
Contact our sales team today to learn more about our products and services.
GET SUPPORT
Our support team can help answer your questions - contact us today.