Bringing Switched Fabric Technology to the Mezzanine Card Form Factor

The PMC (PCI Mezzanine Card) was first adopted for use in commercial and government electronics in 1994 as the IEEE standard 1386.1. The PCI interface is implemented using two 64-pin connectors for 32-bit support with an optional third to extend this to 64-bit PCI. A fourth 64-pin connector, also optional, is provided for user I/O. In the ensuing decade some major extensions were added to the PMC format though addition ANSI and VITA standards. One such extension is ANSI/VITA 20 which defines a conduction-cooled version of PMC for severe environments.

XMC (or Switched Mezzanine Card) owes its existence to the embedded computing community’s acceptance of a groundbreaking proposal in 2002 to standardize gigabit serial switched fabrics and defined in the ANSI/VITA 42.0 specification. The resulting VITA 42.3 XMC Mezzanine specification was a natural extension of the PCI standard by providing PCI Express support and adding new connectors to support gigabit serial interfaces and alternative I/O standards.

XMC has proven to be very successful, expanding past the base VITA 42.0 specification to include technologies such as Parallel RapidIO (ANSI/VITA 42.1), Serial RapidIO (ANSI/VITA42.2), and PCI Express (ANSI/VITA 42.3), to name the first three of a growing list. The PCI Express variant of XMC is by far the most common.

One of the key factors contributing to the popularity of XMC today is the widespread adoption of more sophisticated functions such as FPGA based processors for peripheral I/O functions, an application area where mezzanine cards like XMC are frequently employed. In addition, an increasing proportion of I/O functions are based on serial, rather than parallel interfaces which is exactly the reason the XMC specification was developed. Most new generation VME or VPX CPU or DSP format hosts are likely to have one or more XMC mezzanine sites.

Curtiss-Wright Defense Solutions offers a wide range of flexible, high performance XMC solutions, allowing system integrators to meet the demanding networking and I/O requirements of RADAR, EW, SIGINT, COMINT, ECM, ESM and C4ISR applications.


Designing Multifunction Radar and EW Systems Means Staying Ahead of the Tech Curve Tammy Carter and David Jedynak discuss how huge data demands are pushing radar and... MORE> Configurable FPGAs: More Than a Point Solution Paul Bundick explains the two major challenges that confront developers of... MORE> The Financial Impact of Late Delivery and How to Accelerate Your Time-to-Market This white paper discusses the financial impact of late delivery and how to... MORE> Managing Network Latency Andrew McCoubrey explores how networking features are used to manage and reduce... MORE> Latency: Understanding Delays in Embedded Networks Andrew McCoubrey explores the causes of latency in embedded Ethernet networks and... MORE> Curtiss-Wright on Display: Eurosatory 2018 Michelle Watson looks at some of the highlights from Eurosatory 2018, including... MORE> Maximizing Processing Power in SAR Applications A customer building the next generation synthetic aperture radar (SAR) faced... MORE> The Clock Starts and Stops Here Jeremy Banks looks at how accurate synchronization was achieved using the VPX3-530... MORE> Switch vs Router: What’s the Difference? As networking products have become more complex, the definitions of “switch”... MORE> Linking Outside the Box: Connecting Embedded Systems to Wide-Area Networks This white paper looks at the challenge of connecting embedded systems to... MORE> Multi-Gsps, Multi-board Analog IO Synchronization This case study describes a multi-board solution to phase accurate synchronization... MORE>
Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright


Contact our sales team today to learn more about our products and services.





Our support team can help answer your questions - contact us today.