KAD/CDC/002 24 channels Current-to-Digital Converter

  • Downloads


  • 24 current input channels
  • Simultaneous 14-bit sampling for each channel
  • Input range ±20 mA
  • Accuracy: ±0.5% FSR for input range ±20 mA
  • Programmable range and filter cutoff for each channel
  • For use with 4-20 mA transmitters
  • Short to ground on any channel does not affect others
  • Up to 17,500 samples per second per channel
  • Up to 1.1 kHz bandwidth


  • Current measurements
Acra KAM-500 chassis - 13 user-slots (extended temperature)

KAM/CHS/13U Acra KAM-500 chassis - 13 Slots

The KAM/CHS/13U/ET is a thirteen user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a power supply module which regulates power supplies for the backplane...

NET/REC/001 Ethernet Network Recorder (CompactFlash)

NET/REC/001 Ethernet Network Recorder (CompactFlash)

The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system.   The NET/REC/001 can be configured via...

NET/SWI/101 Ethernet Switch

NET/SWI/101 - Gigabit Ethernet Switch

The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/DSI/102 Discrete input (programmable counters, time tagging) - 24 channel

KAD/DSI/102 24 channel Digital Module

The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...

KAD/VID/106 H.264 video encoder (analog video input) - 1 channel

KAD/VID/106 H.264 Video Encoder

The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...

KAD/MAT/101 Microcontroller-based module

KAD/MAT/101 Microcontroller-based module

The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...

12 channel ADC

KAD/ADC/135 12 channel Full/½-bridge ADC

The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...


Differential-ended current-to-digital converter (1.1 kHz b/w) - 24 channels at 17.5 ksps

The KAD/CDC/002 is used to condition and digitize up to 24 differential-ended current channels. At the heart of the KAD/CDC/002 is a hard-wired state-machine that over-samples all channels and digitally filters any noise above the user-programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by 2, 15-tap, Finite-Impulse-Response (FIR) filters with 32-bit coefficients. All signals are sampled simultaneously. Secondary gain and offset are achieved digitally according to specified range.

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright


Contact our sales team today to learn more about our products and services.





Our support team can help answer your questions - contact us today.