KAD/DSI/003 24 channel Digital Module
- REQUEST A QUOTE
- 24 differential-ended discrete bi-level input channels
- Eight independent 32-bit counters with six different operating modes
- 9 μs internal resolution
- FIFO based time tagging
- Resettable counters
- Independent channel settings for threshold,hysteresis, falling/rising edge detection
- Engine speed measurement
- Slow slew rate, high noise applications
- Timestamping of events
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
24 channel, Bi-level input counters module
The KAD/DSI/003 monitors the status (high/low) of up to 24 D/E discrete channels. The first eight input channels have alternative functions as programmable counters, of which four can be configured as resettable event counters. The remaining 16 channels can be used to trigger time-tagged events.
All 24 discrete signals are sampled simultaneously and can be read as a 24-bit word (16-bit + 8-bit or 12-bit + 12-bit). The KAD/DSI/003 uses 24 separate 14-bit A/Ds operating continuously at 111 ksps to sample each input so the threshold and hysteresis can be programmed separately for each channel.
The first eight counters (channels 0 to 7) can be programmed as PERIOD, FREQUENCY, EVENTS_SINCE_LAST_READ, EVENTS or ELAPSED time. The range of each counter is programmable as is the threshold, hysteresis sensitivity to the rising/falling edge, and roll-over. If the counter uses more than 16 bits, they are treated as two words.
The remaining 16 channels (8 to 23) control the time tagging to the 8K FIFO. For each input, time tagging can be triggered by a rising and/or falling edge, or neither (when the channel is disabled). Every time a trigger occurs, a 64-bit word is written to the FIFO consisting of the status of the 16 inputs (after the change) and the Binary Coded Decimal (BCD) time of when the event happened (up to 23 hours 59 minutes 59.99 9999 seconds).
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.