KAD/ADC/106 Accelerometer ADC
- REQUEST A QUOTE
- Six accelerometer input channels with DC-reject and two differential ended input channels
- Accelerometer input programmable range (±1V, ±10V)
- Differential ended input programmable range (±10mV to ±10V)
- Constant current source excitation on each accelerometer input channel (3.6mA typical)
- Short on any channel does not affect others
- 16 bit simultaneous sampling on each channel
- Up to 24K samples per second per channel
- Up to 6kHz Bandwidth (AAAF filter)
- Accelerometer signal conditioning and digitalization
- Suitable for Integrated Circuit Piezoelectric (ICP), Isotron, Piezotron, and Deltatron sensors
- Differential voltage measurement
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is a Gigabit Ethernet switch designed for operating in harsh environments. Each port on the NET/SWI/101 is full-duplex only and can be set for 10BASE-T, 100BASE-TX, 1000BASE-T link...
Accelerometer ADC (current excitation, programmable analog gain, 6 kHz b/w) - 6 channel ICP and 2 channel D/E at 24 ksps
The KAD/ADC/106 is used to condition and digitize up to eight differential ended analog channels. Six of these channels have a constant current source and high-pass (DC-reject) filter for use with ICP accelerometer devices.
At the heart of the KAD/ADC/106 is a hard-wired state-machine that oversamples all channels at a rate between 96 ksps and 192 ksps and digitally filters any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band, Finite-Impulse-Response (FIR) filters followed by an 8th order Butterworth IIR filter with a default cutoff point set at one quarter of the sampling frequency (fc = fs / 4).
All signals are sampled simultaneously (isochronously). Thus, when several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels are aligned.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.