VPX3-133 3U VPX SBC with NXP Power Architecture T2080 Processor

  • Downloads

Key Features

  • NXP T2080 Quad Core Dual Treaded Power Architecture with AltiVec up to 1.8 GHz
  • Memory
    • Up to 8 GB DDR3 SDRAM controlled by single or dual 64-bit controllers, with ECC
    • 256 MB NOR flash
    • 8 GB NAND flash (expandable)
    • 512 KB FRAM
  • I/O
    • (2) 10/100/1000 Ethernet ports (1000-X capable)
    • (1) XMC site, x4 PCIe Gen2
    • (2) RS-232 and up to (2) RS-422 asynchronous serial channels
    • (1) SATA channel and (4) DIO
  • Fabric Interconnect Ports
    • Fabric Ports configurable as:
    • 1 x8 lane
    • 2 x4 lane
    • and 8 x1 lane PCI Express Gen2 fabric ports
  • Operating Systems
    • LynxOS
    • VxWorks 6.9 BSP, Driver Suite
    • VxWorks 7.0 BSP, Driver Suite
    • Curtiss-Wright developed Linux
    • VxWorks 653
    • Green Hills INTEGRITY-178
    • SYSGO PikeOS
    • Curtiss-Wright U-Boot providing a comprehensive suite of system debug, exerciser, and update functions, BIT, and non-volatile memory sanitization functions
  • Additional Features
    • Designed for embedded, rugged embedded and military/aerospace applications, both air- and conduction-cooled
    • VPX/OpenVPX format with support for 8-slot profiles
    • Support for Curtiss-Wright's TrustedCOTS
    • Support for NXP's Trusted Boot



  • Mission computer applications
  • ISR applications
  • Controllers
P/XMC-651 Rugged Ethernet Mezzanine Switch

P/XMC-651 Rugged Ethernet Mezzanine Switch

The XMC/PMC-651 is a 12-port Gigabit Ethernet switch packaged in the industry-standard XMC form factor. It is designed to support "in-chassis" networks with managed Layer-2 switching capabilities....

XMC-715 Graphics Controller XMC

XMC-715 Graphics Controller XMC

The XMC-715 is an AMD E4690-based high performance graphics controller XMC designed for rugged deployed military and aerospace graphics sub-systems where high-performance, low power, high...

VPX3-716 3U VPX/OpenVPX AMD E8860 Graphics Processor

VPX3-716 3U VPX/OpenVPX AMD E8860 Graphics Processor

The VPX3-716 is an industry-leading rugged 3U VPX/OpenVPX, high performance graphics processor based on the AMD Radeon E8860 Graphics Processing Unit (GPU). The E8860 meets the long lifecycle...


XF07-523 FPGA Digital IO XMC

The XF07-523 is a rugged Kintex-7 FPGA based XMC with digital IO. The combination of direct high-speed I/O ports and FPGA processing makes the XF07-523 ideal for demanding applications including...

XMC-603 MIL-STD-1553 XMC

XMC-603 MIL-STD-1553 XMC

The XMC-603 PMC module allows customers to readily incorporate MIL-STD-1553 into military and aerospace embedded computing systems. As one of several products in our comprehensive range of rugged...

VPX3-215 3U VPX Carrier Card for PMC/XMC Modules

VPX3-215 3U VPX Carrier Card for PMC/XMC Modules

The VPX3-215 ExpressReach 3U VPX carrier card is a member of the 3U VPX line of embedded ruggedized products. Designed to integrate with Curtiss-Wright PCI mezzanine cards (PMCs), this fully...

ACR5330 3U VPX Carrier Card

ACR5330 3U VPX Carrier Card

The ACR5330/CC is an XMC carrier card manufactured by Acromag and is one of a family of open architecture VPX modules available from Curtiss-Wright. The ACR5330/CC is intended for use with...


The VPX3-133 3U VPX Power Architecture Single Board Computer (SBC) is designed with the NXP QorIQ T2080 processor. The T2080 with its 4 dual threaded 64-bit Power Architecture cores, each equipped with an Altivec vector processing engine, provides an impressive amount of processing performance in a very low power foot print. The VPX3-133 OpenVPX SBC takes advantage of the T2080's processing power and combines it with an extensive I/O complement to provide an ideal platform for a wide range of embedded, rugged embedded and military/aerospace applications. Available in a full range of environmental grades, the VPX3-133 SBC is up to the challenging task of delivering high density computing that packs the greatest functionality into the smallest standard form factor.

The VPX3-133 is supported by Wind River VxWorks 6.9 and 7.0 and 653, Green Hills INTEGRITY-178, and SYSGO PikeOS and Linux .

For applications that demand the highest levels of hardware and software protection, or for system designers looking to protect their IP when deployed, the VPX3-133 provides advanced anti-tamper and information assurance with Curtiss-Wright's TrustedCOTS and NXP's Trusted Boot technologies and capabilities. Read Scaling your Power Architecture Applications Blog.

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright


Contact our sales team today to learn more about our products and services.





Our support team can help answer your questions - contact us today.