VPX2500 6U VPX Physical Layer Switch
- REQUEST A QUOTE
- 6U, 0.8" single width VPX
- Rugged, conduction-cooled environment
- Topologies supported: point-to-point, loop, multi-cast
- Four unique configurations stored for instant recall
- 2.5 Gb/s line rate (option to 4 Gb/s)
- 32 ports to VPX backplane – 18 standard, 14 optional
- Eight front panel optical transceivers (optional)
- 32 ports to a special mezzanine board
- Out-of-band control: RS-232 standard, Ethernet optional
The Vortex High-speed Data Recording, Playback & Analysis Subsystems provide signal processing applications for real-time data, meeting demands of increased bandwidth and complexity....
The VPX6-185 NXP Single Board Computer (SBC) provides functionality to the Curtiss-Wright VPX family that includes quad-processor DSP, FPGA accelerator and XMC/PMC carrier modules. The VPX6-185 6U...
The VPX6-187 VPX Single Board Computer (SBC) is based on the NXP QorIQ P4040/4080 SOC multi-core processor. Available in versions with 4 or 8 cores running up to 1.5 GHz, and up to 8 GB of...
XMC and IPM carrier card provides great flexibility to system integrators needing to expand their VPX-based systems' I/O complement via standard PMC modules and/or XMC modules. A direct PCIe...
Curtiss-Wright's VPX6-684 FireBlade provides Systems Integrators with a fast, secure and unified approach to interconnect subsystems, chassis, cards, and compute nodes within any given platform...
The VPX6-6900 is a 6U dataplane switch that supports 24x Serial RapidIO (SRIO) (x4) ports to the VPX backplane enabling systems integrators to architect small to large high-performance systems...
The VPX2500 Physical Layer Switch (PLS) with rear I/O is a managed, non-blocking cross-point switch implemented on a VITA 46-compliant 6U, 0.8" VPX single-slot conduction-cooled rugged card, supporting multiple data rates up to 2.5 Gb/s. The VPX2500 6U VPX cross-point switch provides an 18-port switch solution via VPX rear I/O backplane connections. Each port input provides an option of data retiming or bypassing the retiming circuitry altogether. The protocol or structure of data routed through the switch is ignored by the VPX2500 VPX cross-point switch and is unaltered by its passage through the switch. Communication with the VPX2500 is through its RS-232 link, where the user can log on and use the command line interface (CLI) to configure the cross-point, set up access levers, port topology, retiming option, and check status.
Redundancy: Redundancy is important in many applications, but military vessels are especially liable to damage. In this application, sensors and radar signals are routed to a PLS and multiplexed in a redundancy configuration. If the ship is damaged on one side, the data will still be available via the alternate path.
Media Conversion: Sensor signals from 300 meters away can be sent to the switch for conversion to copper. Copper signals then can be routed to the VPX backplane for processing.
Multi-Cast: A sensor is sending its collected data via multiple channels, as is typical for transporting such large amounts of sensor information. The cross-point switch provides the capability to send the same data to multiple destinations. Suffering no data loss, the cross-point switch passes the data to multiple data processors and recorders without slowing down the sensor.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.